Snmp Community Names - 3Com V7122 User Manual

Currently, both SNMP and ini file commands and downloads are not encrypted. For ini file
encoding, see Secured ini

SNMP Community Names

By default, the device uses a single, read-only community string of 'public' and a single read-
write community string of 'private'.
The following community strings can be defined:
Up to five read-only community strings
Up to five read-write community strings
A single trap community string
Each community string must be associated with one of the following predefined SNMP
groups:
SNMP Predefined Groups
Table 74
Group
ReadGroup
ReadWriteGroup
TrapGroup
Configuration of Community Strings Using the Web
For detailed information on configuration the community strings using the Embedded Web
Server, see Configuring the SNMP Community
Configuration of Community Strings Using the ini File
The following ini file parameters are used to configure community strings:
SNMPReadOnlyCommunityString_<x> = '#######'
SNMPReadWriteCommunityString_<x> = '#######'
Where <x> is a number from 0 to 4. The '#' character represents any alphanumeric
character. The maximum length of the string is 20 characters.
Configuration of Community Strings Using SNMP
To configure read-only and read-write community strings, the EM must use the
snmpCommunityMIB. To configure the trap community string, the EM must also use the
snmpVacmMIB and the snmpTargetMIB.
V7122 Gateway User Guide
File.
Get Access Set Access
Yes No
Yes Yes
No No
Can Send Traps
Yes
Yes
Yes
Strings.
375