3Com V7122 User Manual page 155

ini File Field Name
Web Parameter Name
RoutingTableGatewaysColumn
RoutingTableHopsCountColumn
RoutingTableInterfacesColumn
VLAN Parameters
VlanMode
[VLAN Mode]
VlanNativeVlanID
[Native VLAN ID]
VlanOamVlanID
[OAM VLAN ID]
VlanControlVlanID
[Control VLAN ID]
VlanMediaVlanID
[Media VLAN ID]
VlanNetworkServiceClassPriority
[Network Priority]
VlanPremiumServiceClassMediaPriority
[Media Premium Priority]
VlanPremiumServiceClassControlPriority
[Control Premium Priority]
VlanGoldServiceClassPriority
[Gold Priority]
VlanBronzeServiceClassPriority
[Bronze Priority]
EnableDNSasOAM
V7122 Gateway User Guide
Valid Range and Description
Specifies the IP address of the router to which the packets
are sent if their destination matches the rules in the adjacent
columns.
The maximum number of allowed routers between the
gateway and destination.
Specifies the network type the routing rule is applied to.
0 = OAM (default).
1 = Control.
2 = Media.
Sets the VLAN functionality.
0 = Disable (default)
1 = Enable
2 [PassThrough] = N/A.
Sets the native VLAN identifier (PVID, Port VLAN ID).
The valid range is 1 to 4094. The default value is 1.
Sets the OAM (Operation, Administration and Management)
VLAN identifier.
The valid range is 1 to 4094. The default value is 1.
Sets the control VLAN identifier.
The valid range is 1 to 4094. The default value is 2.
Sets the media VLAN identifier.
The valid range is 1 to 4094. The default value is 3.
Sets the priority for Network service class content.
The valid range is 0 to 7. The default value is 7.
Sets the priority for the Premium service class content and
media traffic.
The valid range is 0 to 7. The default value is 6.
Sets the priority for the Premium service class content and
control traffic.
The valid range is 0 to 7. The default value is 6.
Sets the priority for the Gold service class content.
The valid range is 0 to 7. The default value is 4.
Sets the priority for the Bronze service class content.
The valid range is 0 to 7. The default value is 2.
This parameter applies to both Multiple IPs and VLAN
mechanisms.
Multiple IPs: Determines the network type for DNS
services.
VLAN: Determines the traffic type for DNS
services.
1 = OAM (default)
0 = Control.
155