3Com V7122 User Manual page 308

Use a gif, jpg or jpeg file for the background image. It is important that the image
file has a fixed height of 59 pixels. The size of the image files (logo and
background) is limited each to 64 kbytes.
To replace the background image using the Web:
Access the gateway's Embedded Web Server (see
1
Server).
In the URL field, append the suffix 'AdminPage' (note that it's case-sensitive) to the IP
2
address, for example, http://10.1.229.17/AdminPage.
Click the Image Load to Device, the Image Download screen is displayed (shown in
3
Figure 92).
Click the Browse button in the Send Background Image File from your computer to
4
gateway box. Navigate to the folder that contains the background image file you want to
load.
Click the Send File button; the file is sent to the device. When loading is complete, the
5
screen is automatically refreshed and the new background image is displayed.
To save the image to flash memory so it is available after a power fail, see
6
Configuration.
The new background appears on all Web Interface screens.
If you encounter any problem during the loading of the files, or you want to restore
the default images, click the Restore Default Images button.
When replacing both the background image and the logo image, first load the
logo image followed by the background image.
To replace the background image using the ini file:
Place your background image file in the same folder as where the device's ini file is
1
located (that is, the same location defined in the BootP/TFTP configuration utility). For
detailed information on the BootP/TFTP, see Appendix
Configuration Utility.
Add/modify the ini file parameters in
2
Modifying an ini File.
Loading the device's ini file using the 'Configuration File' screen in the Web
Interface doesn't load the logo image file as well.
308
Accessing the Embedded Web
A ppendix D: The BootP/TFTP
4 1
Table 63 according to the procedure described in
Saving
V7122 GatewayUser Guide