Resetting The Gateway - 3Com V7122 User Manual

Resetting the Gateway

The 'Maintenance Actions' screen enables you to remotely reset the gateway. Before you
reset the gateway, you can choose the following options:
Save the gateway's current configuration to the flash memory (non-volatile) before reset.
Perform a graceful shutdown. Reset starts only after a user-defined time expires or no
more active traffic exists (the earliest thereof).
To reset the gateway:
Open the 'Maintenance Actions' screen (Maintenance menu); the 'Maintenance Actions'
1
screen is displayed.
Maintenance Actions Screen
Figure 75
Under the RESET group, from the 'Burn To FLASH' drop-down list, select one of the
2
following options:
'Yes': The gateway's current configuration is burned (that is, saved) to the flash
memory prior to reset (default).
'No': Resets the device without burning (that is, saving) the current configuration to
flash (discards all unsaved modifications to the configuration).
Under the RESET group, from the 'Graceful Option' drop-down list, select one of the
3
following options:
142
V7122 GatewayUser Guide