3Com V7122 User Manual page 286

Example of VLAN and Multiple IPs ini File Parameters
Figure 85
; VLAN Configuration
VlanMode=1
VlanOamVlanId=4
VlanNativeVlanId=4
VlanControlVlanId=5
VlanMediaVlanID=6
; Multiple IPs Configuration
EnableMultipleIPs=1
LocalMediaIPAddress=10.33.174.50
LocalMediaSubnetMask=255.255.0.0
LocalMediaDefaultGW=10.33.0.1
LocalControlIPAddress=10.32.174.50
LocalControlSubnetMask=255.255.0.0
LocalControlDefaultGW=0.0.0.0
LocalOAMPAddress=10.31.174.50
LocalOAMSubnetMask=255.255.0.0
LocalOAMDefaultGW=0.0.0.0
; IP Routing table parameters
RoutingTableDestinationsColumn = 130.33.4.6, 83.4.87.6
RoutingTableDestinationMasksColumn = 255.255.255.255 , 255.255.255.0
RoutingTableGatewaysColumn = 10.32.0.1 , 10.31.0.1
RoutingTableInterfacesColumn = 1 , 0
RoutingTableHopsCountColumn = 20,20
Use the BootP/TFTP utility
2
(-fb option) the firmware version and the ini file you prepared in the previous step to the
gateway (VLANs and multiple IPs support is available only when the firmware is burned
to flash).
Reset the gateway after disabling it on the BootP/TFTP utility.
3
286
(Loading the cmp File, Booting the Device) to load and burn
V7122 GatewayUser Guide