3Com V7122 User Manual page 53

Fasten the screws on the front panel of the board to secure the board to the chassis.
3
To insert the TP-1610 RTM into the chassis:
Choose an available slot in a compactPCI™ chassis and gently insert the TP-1610 RTM
1
into it; as the TP-1610 RTM is inserted, the black plastic handles, at both ends of the
board's panel, must engage with the chassis. When the TP-1610 RTM is firmly mounted
into the correct position inside the chassis, the red plastic latches within each handle
self-lock (this also ensures that the TP-1610 board is properly earthed using the
chassis).
Fasten the screws on the front panel of the board to secure the board to the chassis.
2
Removing Boards
To remove the TP-1610 board from the chassis:
Unfasten the screws on the plate of the board.
1
Press the red ejector buttons on the two black ejector/injector latches on both ends and
2
wait for the hot-swap blue LED to light, indicating that the board can be removed.
Pull on the two ejector/injector latches and ease out the board from the slot.
3
V7122 Gateway User Guide
53