3Com V7122 User Manual page 167

ini File Field Name
Web Parameter Name
ResetWebPassword
DisableWebConfig
HTTPport
Telnet Parameters
TelnetServerEnable
[Embedded Telnet Server]
TelnetServerPort
[Telnet Server TCP Port]
TelnetServerIdleDisconnec
t
[Telnet Server Idle Timeout]
Customizing the Web Appearance Parameters
For detailed information on customizing the Web Interface, see
UseProductName
UserProductName
UseWebLogo
WebLogoText
LogoWidth
V7122 Gateway User Guide
Valid Range and Description
Resets the username and password of the primary and secondary accounts
to their defaults.
0 = Password and username retain their values (default).
1 = Password and username are reset (for the default username and
password, see Table 18).
The username and password cannot be reset from the Web (that
is, using AdminPage or by loading an ini file).
0 = Enable changing parameters from Web (default).
1 = Operate Web Server in 'read only' mode.
HTTP port used for Web management (default = 80)
Enables or disables the embedded Telnet server. Telnet is disabled by
default for security reasons.
0 = Disable (default).
1 = Enable (Unsecured).
2 = Enable Secured (SSL).
Defines the port number for the embedded Telnet server.
The valid range = valid port numbers. The default port is 23.
Sets the timeout for disconnection of an idle Telnet session (in minutes).
When set to zero, idle sessions are not disconnected.
The valid range is any value. The default value is 0.
0 = Disabled (default).
1 = Enabled.
If enabled, the 'UserProductNane' text string is displayed instead of the
default product name.
Text string that replaces the product name.
The default is 'V7122'.
The string can be up to 29 characters.
0 = Logo image is used (default).
1 = Text string is used instead of a logo image.
If enabled, 3Com' default logo (or any other logo defined by the
'LogoFileName' parameter) is replaced with a text string defined by the
'WebLogoText' parameter.
Text string that replaces the logo image.
The string can be up to 15 characters.
Width (in pixels) of the logo image.
The optimal setting depends on the resolution settings.
The default value is 441, which is the width of 3Com' displayed logo.
Customizing the V7122 Web Interface.
167