3Com V7122 User Manual page 449

Figure 134 Prerecorded Tones Screen
To add the prerecorded tone files (you created in Step 1) to the 'Prerecorded Tones'
4
screen follow one of these procedures:
Select the files and drag them to the 'Prerecorded Tones' screen.
Click the Add File(s) button; the 'Select Files' screen opens. Select the required
Prerecorded Tone files and click the Add>> button. Close the 'Select Files' screen.
For each raw data file, define a Tone Type, a Coder and a Default Duration by
5
completing the following 6 steps:
Double-click or right-click the required file; the 'File Data' window (shown in
Figure 131) appears.
From the 'Type' drop-down list, select the tone type this raw data file is associated
with.
From the 'Coder' drop-down list, select the coder that corresponds to the coder this
raw data file was originally recorded with.
In the 'Description' field, enter additional identifying information (optional).
V7122 Gateway User Guide
449