3Com V7122 User Manual page 238

Locate the configuration files you want to load and the ini file in the same directory.
2
Invoke a BootP/TFTP session; the ini and configuration files are loaded onto the device.
3
Table 47 describes the ini file parameters that are associated with the configuration files.
Configuration File Parameters
Table 47
ini File Field Name
CallProgressTonesFilename The name of the file containing the Call Progress Tones definitions. See
VoicePromptsFileName
CASFileName
CASFileName_x
CASTablesNum
PrerecordedTonesFileName The name (and path) of the file containing the Prerecorded Tones.
UserInfoFileName
SaveConfiguration
238
Valid Range and Description
C hapter 16: Configuration Files
1
and load this file.
The name (and path) of the file containing the Voice Prompts definitions.
See Prerecorded Tones (PRT) File
create and load this file.
This is the name of the file containing specific CAS protocol definition (such
as 'E_M_WinkTable.dat'). These files are provided to support various types
of CAS signaling.
CAS file name (for example, 'E_M_WinkTable.dat') that defines the CAS
protocol. It is possible to define up to eight different CAS files by repeating
this parameter. Each CAS file can be associated with one or more of the
gateway trunks using the parameter CASTableIndex_x.
Number, 1 to 8. Specifies how many CAS configuration files are loaded.
The name (and path) of the file containing the User Information data.
Determines if the gateway's configuration (parameters and files) is saved to
flash (non-volatile memory).
0 = Configuration isn't saved to flash memory.
1 = Configuration is saved to flash memory (default).
for additional information on how to create
for additional information on how to
V7122 GatewayUser Guide