3Com V7122 User Manual page 187

ini File Field Name
Web Parameter Name
MultiPtimeFormat
[Multiple Packetization Time
Format]
EnableReasonHeader
[Enable Reason Header]
EnablePtime
EnableUserInfoUsage
[Enable User-Information
Usage]
CoderName
V7122 Gateway User Guide
Valid Range and Description
Determines whether the 'mptime' attribute is included in the outgoing SDP.
Valid options include:
0 = Disable (default)
1 = Enable (includes the mptime attribute in the outgoing SDP --
PacketCable defined format)
The 'mptime' attribute enables the gateway to define a separate
Packetization period for each negotiated coder in the SDP. The 'mptime'
attribute is only included if this parameter is enabled, even if the remote
side includes it in the SDP offer.
Upon reception, each coder receives its 'ptime' value in the following
precedence:
1. From 'mptime' attribute.
2. From 'ptime' attribute.
3. Default value.
Enables / disables the usage of the SIP Reason header.
0 = Disable.
1 = Enable (default).
0 = Remove the ptime header from SDP.
1 = Include the ptime header in SDP (default).
Enables or disables usage of the User Information loaded to the gateway
via the User Information auxiliary file.
0 = Disable (default).
1 = Enable.
Defines the gateway's coder list (up to five coders can be configured).
Enter coders in the following format:
CoderName=<Coder Name>,<Ptime>,<Rate>,<Payload Type>,<Silence
Suppression Mode>.
Packetization
Coder Name
Time
G.711 A-law 10, 20
[g711Alaw64k] (default), 30,
40, 50, 60, 80,
100, 120
G.711 μ-law
10, 20
(default), 30,
[g711Ulaw64k]
40, 50, 60, 80,
100, 120
G.729 10, 20
[g729] (default), 30,
40, 50, 60, 80,
100
Payload Silence
Rate
Type Suppression
Always Always 8 Disable [0]
64 Enable [1]
Always Always 0 Disable [0]
64 Enable [1]
Always 8 Always 18 Disable [0]
Enable [1]
Enable w/o
Adaptations
[2]
187