Configuring Ss7 Tunneling - 3Com V7122 User Manual

b) Modify each bit field according to your requirements.
c) Click the Submit button to save your changes.
After modifying the parameters:
7
a) To apply the changes to the selected trunk only, click the Apply Trunk Settings
button.
b) To apply the changes to all the trunks, click the Apply to all Trunks button.
The screen is refreshed; parameters become read-only (indicated by being grayed). The
8
Stop Trunk button appears at the bottom of the screen.
To save the changes so they are available after a power fail, see
9
Some parameter configuration options require a device reset; when this is the
case, the Web Interface prompts the user.
10 To reset the gateway, see

Configuring SS7 Tunneling

For a detailed description of the SS7 Tunneling parameters, see
From the SS7 Configuration menu you can:
Configure M2P2 Attributes (see
Configure Links (see
Configure Sigtran Group IDs (see
Configure Sigtran Interface IDs (see
Configuring M2P2 Attributes
For a detailed description of M2P2 attributes, see
To configure the M2P2 Attributes parameters:
Open the 'M2P2 Attributes' screen (Advanced Configuration menu > SS7
1
Configuration > M2P2 Attributes option); the 'M2P2 Attributes' screen is displayed.
108
Saving Configuration.
Configuring M2P2
Configuring Links).
Configuring Sigtran Group
Configuring Sigtran Interface
Saving
SS7 Parameter
Attributes)
Ids)
Ids)
SS7 Parameter Tables.
V7122 GatewayUser Guide
Configuration.
Tables.