Replacing The Background Image File - 3Com V7122 User Manual

To replace the default logo with your own corporate image using the ini file:
Place your corporate logo image file in the same folder as where the device's ini file is
1
located (that is, the same location defined in the BootP/TFTP configuration utility). For
detailed information on the BootP/TFTP, see Appendix
Configuration Utility.
Add/modify the two ini file parameters in
2
in Modifying an ini
Loading the device's ini file using the 'Configuration File' screen in the Web
Interface doesn't load the corporate logo image files as well.
Customizable Logo ini File Parameters
Table 60
Parameter
LogoFileName
LogoWidth
Replacing the Main Corporate Logo with a Text String
The main corporate logo can be replaced with a text string.
To replace the default logo with a text string using the Web Interface, modify the two ini
file parameters in
Parameters Using the Web
To replace the default logo with a text string using the ini file, add/modify the two ini file
parameters in Table 61
Web Appearance Customizable ini File Parameters
Table 61
Parameter
UseWebLogo
WebLogoText

Replacing the Background Image File

The background image file is duplicated across the width of the screen. The number of times
the image is duplicated depends on the width of the background image and screen
resolution. When choosing your background image, keep this in mind.
V7122 Gateway User Guide
File.
Description
The name of the image file containing your corporate logo.
Use a gif, jpg or jpeg image file.
The default is 3Com' logo file.
The length of the name of the image file is limited to 47
characters.
Width (in pixels) of the logo image.
The optimal setting depends on the resolution settings. The
default value is 339, which is the width of 3Com' displayed logo.
Table 61 according to the procedure described in
AdminPage.
according to the procedure described in
Description
0 = Logo image is used (default).
1 = Text string is used instead of a logo image.
Text string that replaces the logo image.
The string can be up to 15 characters.
A ppendix D: The BootP/TFTP
1
Table 60 according to the procedure described
Modifying ini File
Modifying an ini File.
307