Positioning Original On Platen Glass - Konica Minolta 7022 Instruction Manual

Positioning Original on Platen Glass

Use the platen glass when originals are not suitable for use with the document feeder,
e.g., when size is incompatible, or when originals are folded, stapled, torn, or in other-
wise poor condition.
1.
Raise the document feeder (or platen cover).
Place original FACE DOWN in the left rear corner, aligning the edge with the left
measuring guide.
2.
Gently close the document feeder (or platen cover) to prevent the
original from shifting on the glass.
When selecting Book Copy, Non-Image Area Erase, AUTO mode in Repeat,
or AUTO Layout, DO NOT CLOSE the document feeder. For details on each
function, see Section 8.
3.
When repeating the original placement, press the release lever under
the document feeder.
Positioning Originals (continued)
Reminder!
3
C opying
Operations
Positioning
Originals
Setting Print
Quantity
Paper Size
Lens Mode
Density
1-1, 2-2
2-1
Using
Memory
Output without
Finisher
FS-107
Output Modes
IT-101
Output Modes
Check Mode
& Proof Copy
Interrupt
Mode
3-5