Positioning Originals
Positioning Original on Platen Glass
Use the platen glass when originals are not suitable for use with the document
feeder, e.g., when size is incompatible, or when originals are folded, stapled, torn, or
in generally poor condition.
1.
Raise the document feeder or platen cover.
2.
Place original FACE DOWN in the left rear corner.
The direction of the original should conform to the Original direction icon
displayed at the upper left corner of the Basic Screen.
The copy result may not be satisfactory if the original is set in wrong
direction. Be sure that the original is set in the same direction as indicated by
the Original direction icon, especially when making double-sided copies or
using Staple, Stitch&Fold, Fold, or Booklet mode. See p. 9-2 for details.
3.
Gently close the document feeder or platen cover to prevent the
original from shifting on the glass.
3-8