Timer Interrupt Password Setting - Konica Minolta BIZHUB PRO C500 User Manual

[9] Weekly Timer

[5] Timer Interrupt Password Setting

Use this password setting mode to establish a 4-digit password requirement for
using Timer Interrupt function. The default password of 0000 allows the timer
function to be interrupted without the requirement for password entry.
Weekly Timer Setting Menu Screen
Procedure
1 Touch [5] Timer interrupt password set on the Weekly Timer Setting Menu
Screen to display the Timer Interrupt Password Setting Screen.
2 Use the touch screen keypad to enter a 4-digit password, and then touch OK to
complete the setting and return to the Weekly Timer Setting Menu Screen.
NOTE:
When the password setting is 0000, Timer Interrupt can be used simply by
turning the copier OFF, then ON. In this case, you will be asked to enter the
duration of use (a period of time to turn the copier power on).
3 If other Weekly Timer setting changes are required, select the desired menu item,
from [1]~[5].
4 Touch PREVIOUS SCREEN on the Weekly Timer Setting Menu Screen to restore
the Key Operator Mode Screen.
14-34
Timer Interrupt Password Setting Screen