Programming Different Settings For An Output Job (Program Job) - Konica Minolta 7255 Instruction Manual

Programming Different Settings for an Output Job
(Program Job)
In the ordinary Store mode, the combined features selected for the job are
applied to all originals to be scanned. In the Program Job mode, you may
scan multiple sets of originals and apply different settings on each set
(referred to as JOB), then output them all as a complete set.
>>>Specifications for Program Job<<<
❒ Max. 100 JOBs can be programmed for an output job.
❒ Once specified, paper size and the paper type/size setting for Multi-sheet
bypass tray cannot be changed for another JOB.
❒ Output mode and print quantity setting cannot be specified for each JOB.
The last setting made will be applied to all JOBs.
❒ Program Job settings cannot be stored in Job Memory.
❒ Incompatible Conditions: APS, Change paper size, Rotation, Group, Rota-
tion Sort, Rotation Group, Fold, Stitch&Fold, Punch with PK-110 Punching
kit, Three-Fold, Server function except Image Store & Output mode, Mixed
Original, Sheet/Cover Insertion, Chapter, Combination, Booklet, OHP Inter-
leave, Image Insert, Dual Page, 2/4/8 Repeat in Repeat, Overlay, Storing
image in Overlay Memory
1 2
JOB A
1.
Touch APPLICATION on the Basic Screen.
When starting a new copying job, be sure to close the RADF securely,
then press [AUTO RESET].
9-26
5 6
3 4 3 4
1 2 1 2
JOB B JOB C
Please Be Reminded!
9 10
7 8
5 6
9 10
7 8
5 6
3 4
1 2
5 6
3 4
1 2
1 2
Copied set