Programmed Shut-Off (Weekly Timer) - Konica Minolta 7255 Instruction Manual

Programmed Shut-Off (Weekly Timer)

The Weekly Timer function manages a copier to be turned on and off at the
time specified by the Key Operator to disable copying during off time.
This function is not factory-set.
When a copier is under control of the Weekly Timer function, the TIMER
indicator on the right side of the control panel is lit.
IMPORTANT: WHEN THE TIMER INDICATOR IS LIT, THE COPIER
WILL TURN OFF AUTOMATICALLY. DO NOT TURN IT OFF BY
PRESSING POWER SWITCH.
When the TIMER indicator light is on and other indicators are off, copying is
unavailable due to the Weekly Timer function.
However, copying will be available by using the following procedure.
1.
Press [POWER SAVER ON/OFF] on the control panel.
For details of the Weekly Timer function, see p. 13-27 to p. 13-35.
The Basic screen will be displayed along with the message shown below.
Timer interrupt mode
Enter password
The machine power will be turned off automatically after 5 minutes from
this state.
7-2
Please Be Reminded!
HINT
FOR DETAILS