Table of Contents
Advertisement
When "Call for Service" Message Is Displayed
Limited Use of the Copier in Trouble
If the message shown below is displayed on the Call for Service Screen, you may
continue operating the copier on a limited function basis and utilize the trays and
ADU that are not affected by the trouble. To obtain this limited functionality of the
copier, consult your service representative. Be sure to utilize the limited function
only temporarily, and arrange for machine repair immediately.
1.
If the limited use of the copier is available, the following message
is displayed in the message area instead of the Report code.
ex.
Tray 2 failure
Press AUTO to select except this tray
2.
Press [AUTO RESET].
Please switch ON/OFF
E 18-2
Make note of the Report code No.
3.
Turn OFF then ON the power switch.
A copying job can continue without using the troubled portion of the machine
(ex. Tray 2).
EVEN IF THE COPYING JOB CAN BE CONTINUED WITH THE ABOVE
OPERATION, BE SURE TO CONTACT YOUR SERVICE
REPRESENTATIVE IMMEDIATELY WHEN THE CALL FOR SERVICE
SCREEN IS DISPLAYED.
5-4
Hide quick links:
Advertisement
Table of Contents
