Illustration
[32] The sticker inside the paper trays indicates how to load the media
Load the media
Put a small stack of the media into the paper tray.
1.
Pinch the green handle of the right-hand guide and push the guide against the edge of
2.
the media.
Turn the green knob to adjust the front guide and the rear guide.
3.
Put the rest of the media on top of the small stack.
4.
Note:
When you want to assign the media later you must press the 'Not assigned' button
paper module' on page
35), as indicated at the right-hand side of the sticker.
Chapter 4 - Work with the operator panel
Load the media
(see'The
49