Chapter 3; Overview Of The System - Oce VarioPrint 4110 User Manual

Output loca-
tion
3 Finisher (op-
tional)
4 Finisher upper
output (option-
al)
5 Stacker/stapler
upper output
6 Stacker/stapler
lower output
7 Stacker (op-
tional)
Description
The optional finisher contains the following output trays.
3 output trays
1 upper output (see number 6 below)
The finisher contains 2 staple cartridges to staple the jobs. The
3 output trays can receive A4, Letter and similar media sizes.
Stapled jobs (A4, Letter and similar media sizes only) go into
the output trays. The total capacity of the output trays is 4,500
sheets (80 g/m² or 20 lb bond).
Note:
The output trays cannot receive tab sheets.
The finisher upper output is part of the finisher. The upper
output can receive all formats. However, the upper output is
mainly intended for large media or jobs with mixed size media.
The maximum capacity of the upper output is 500 sheets (80
g/m² or 20 lb bond).
Note:
The upper output does not contain staple cartridges.
Therefore, the upper output cannot be the output loca-
tion for jobs that require staples.
The upper output is the upper tray of the stacker/stapler. The
capacity of the upper output is 250 sheets (80 g/m² or 20 lb
bond).
The optional stacker/stapler contains 1 staple cartridge to staple
the jobs. The staple cartridge can staple your document with 1
or 2 staples. The stacker/stapler can stack and staple various
media sizes. The device supports the stapling of mixed media
sizes, as long as the width of the media is the same. The capacity
of the lower tray is 2,000 sheets (80 g/m² or 20 lb bond).
The optional stacker has a capacity of 6,000 sheets, in 2 stacks
of 3,000 sheets each (80 g/m² or 20 lb. bond).
The stacker does not contain stapler units. Therefore, the
stacker cannot be the output location for jobs that require sta-
ples.
Chapter 3 - Overview of the system components
The output locations
33