Table of Contents
Advertisement
When
The '<html>Check first set</html>' set-
ting in a 'Workflow profile' is 'On' (see
'Work with the workflow profiles' on page
179) and this setting is also enabled in the
job
The 'Confirm start of job' setting in a
'Workflow profile' is 'On'
Note:
When you print streaming jobs
press the Hold key
Stop after a set
Press the Hold key
1.
The red LED of the Hold key
The machine stops when a set of the active print job
Stop after a page
Press the Hold key
1.
The red LED of the Hold key
The machine stops as soon as possible.
Note:
The memory of the machine can contain up to 50 pages. Therefore, it is possible that
the machine prints more than a set before the machine stops.
Stop after a job
In the list of 'Scheduled jobs' in the 'Jobs' view, press the job after which the machine
1.
must stop.
Press 'Stop after job'.
2.
or jobs that consist of 1 large set, you must always
2 times to stop the machine as soon as possible.
1 time.
starts to blink.
2 times.
starts to blink.
Then
The machine stops each time the first set
of a print job is ready. You can check the
first set before you continue the print job.
The machine stops each time at the start
of a job. You must start each job manual-
ly.
is ready.
Chapter 4 - Work with the operator panel
Stop a print job
51
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
