Oce VarioPrint 4110 User Manual page 187

The following dialogue box appears.
[109] Set the warning time
Press the - or + button to decrease or increase the warning time.
4.
You can set a time from 1 - 60 minutes.
Press 'OK'.
5.
Disable the warning time
On the operator panel, press the 'System' button.
1.
Press 'Setup'.
2.
Press the 'Warning time' button in the 'User interface' section.
3.
A dialogue box appears. When the 'Warning in advance' function is enabled, the
'Warning in advance' button displays a check mark and the status 'On'.
Press the 'Warning in advance' button.
4.
Chapter 4 - Work with the operator panel
Change the warning time
187