The Scan Profiles File; Description Of The Scan Job - Oce VarioPrint 4110 User Manual

The scan profiles file

Introduction
The scan profiles file (.csv file) on the controller allows you to define different scan profiles.
Each scan profile contains a combination of individual settings for a certain type of scan
job. The name of a scan profile that is used in the scan profiles file, is displayed on the
operator panel. The .csv file can contain various scan profiles, both for scan-to-file jobs
and for scan-to-email jobs. When the scan profiles file is available and configured, the
scan profiles become visible in the 'Copy/Scan' view on the operator panel. Specific names
identify the available scan profiles. To carry out a scan job you can simply select the re-
quired scan profile in the 'Copy/Scan' view.
The .csv file contains record fields. The record fields allow you to define specific settings
for each scan profile. The table below describes the record fields of a .csv file. To change
the settings of a scan profile permanently, you must first download the .csv file from the
controller through the Settings Editor application. Then you can open the file in for ex-
ample Microsoft
you changed and saved the file, you must upload the file to the controller. The changed
file overwrites the previous file.
Note:
The scan profiles file can contain a maximum of 99 scan profiles.
Note:
For each scan job, you can change a number of scan profile settings on the operator
panel (see
apply to the current job.
The record fields of the scan profiles file
The record fields of the scan profiles file
Field name
(header)
dispname*
®
Excel and change the settings. You can also add new scan profiles. After
'Description of the scan job settings' on page
Description
Display name
Use this field to enter a name for the scan profile. The name of the
scan profile is displayed on the operator panel. The name can be
any name between 1 and 40 characters. You can use all alphanumeric
characters except <CR>, <LF>, <,> and <;>.
148). However, these changes only
#
Chapter 4 - Work with the operator panel
The scan profiles file
141