The Paper Module - Oce VarioPrint 4110 User Manual

The paper module

Introduction
The paper trays contain the media that are required for the print jobs. The default con-
figuration of the machine contains 1 paper module with 4 paper trays. You can add 1
more paper module to the default configuration to increase the media input capacity.
You can find more information about the capacities of the paper trays and the supported
media size in the appendix of this manual.
This section describes the control panel on the paper module.
Note:
You can use the control panel on the paper module to open the paper trays and load the
media. However, the recommended way to open the paper trays and assign the media
is via the 'Schedule' view (see
trays and/or assign the media via the 'Trays' view (see
on page 168).
Illustration
1 1
2 2
3 3
4 4
[16] The control panel on the paper module
The control panel
The paper module contains a control panel next to the upper paper tray. The control
panel consists of 4 sections that correspond with the 4 paper trays. Each section displays
the current filling level of the corresponding paper tray. Furthermore, the control panel
indicates whether the media in the paper tray is assigned or not. The following table de-
scribes the various parts of the control panel.
'Load the media' on page
5
1 3
2 4
48). You can also open the paper
'Assign the media to a paper tray'
Chapter 3 - Overview of the system components
The paper module
35