Check The Status Of The Staple Cartridges - Oce VarioPrint 4110 User Manual

Check the status of the staple cartridges

Introduction
The following output locations (see
cartridges to staple your jobs.
The stacker/stapler
The finisher.
When all the staple cartridges are sufficiently filled, the staple icon in the dashboard (see
'The dashboard' on page
red, one of the staple cartridges is empty or almost empty. You must refill the staple car-
tridge as soon as possible (see
256 or 'Finisher: Add staples' on page
To find out which staple cartridge is empty or almost empty, you must go to the 'Printer'
section of the 'System' view. The icon for the staple cartridge that must be refilled is orange
or red.
Note:
Even when the staple icon is blue, you can still go to the 'System' view to check the
number of staples that has been used since the last refill.
The colours of the staple icon
The colours of the staple icon
Staple icon
Check the status of the staple cartridges
Check the staple icon in the dashboard.
1.
When the staple icon is orange or red, go to the 'Printer' section of the 'System' view to
2.
check which staple cartridge must be refilled.
'The output locations' on page
42) is blue. When the staple icon in the dashboard is orange or
'Stacker/stapler (iMFS): Replace the staple cartridge' on page
250).
#
Description
A blue staple icon indicates that all the staple cartridges contain
sufficient staples.
An orange staple icon indicates that one of the staple cartridges
is almost empty.
A red staple icon indicates that one of the staple cartridges is
empty. The printer stops when a job requires staples from the
empty staple cartridge.
Chapter 4 - Work with the operator panel
Check the status of the staple cartridges
32) contain staple
173