Table of Contents
Advertisement
Setting
Values
'Check first
'On'
set'
'Off'
'<html>As in
job</html>'
'Next output
'<html>After
tray'
each
job</html>'
'<html>When
tray is
full</html>'
'Offset stack-
' < html>Jobs</html>'
ing'
'<html>Sets
(al-
ways)</html>'
'<html>Sets
(as in
job)</html>'
'<html>Ban-
ners</html>'
'<html>Off</html>'
Effect
The machine goes on hold after the first set of a
job is printed. You can check the quality and lay-
out of the first set before the machine prints the
remaining sets.
The machine will print the whole job without
stopping after the first set.
The machine will print the jobs as indicated in the
job ticket.
Each job is sent to the next available output tray.
In this context, the second stack of the stacker is
also defined as an output tray.
All the jobs are stacked until an output tray is full.
When an output tray is full, the next jobs are sent
to the next output tray.
Each printed job that is delivered to an output lo-
cation is stacked on top of the previous printed
job with an offset. This helps you to identify the
various jobs.
Each printed set that is delivered to an output lo-
cation is stacked on top of the previous set with
an offset. This helps you to identify the various
sets.
Each printed set is delivered to the output location
as defined in the job ticket or copy job. Therefore,
the sets can be stacked in one straight line or with
an offset.
Each banner page of a job is delivered to the out-
put location with an offset. This helps you to
identify the separate jobs. The jobs themselves are
stacked in one straight line.
All the printed jobs or sets are stacked in one
straight line. There is no offset between the jobs
or sets.
Chapter 4 - Work with the operator panel
Work with the workflow profiles
183
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
