Description Of The Copy Job - Oce VarioPrint 4110 User Manual

Description of the copy job settings
Name of the
setting
'Zoom'
'Align'
'Shift'
114 Chapter 4 - Work with the operator panel
Values Description
'Fit to page' You can select a media size for the output that differs
from the media size of the original. When the 'Fit to
page' setting is enabled, the system scales the original
in such a way that the image fits on the selected media
size of the output.
'Percent' Use this setting to change the zoom manually within
the range 25% to 400%.
'Top left' An image on a sheet may be smaller than the media
size of the output, for example because you scaled the
image to 70% of its original size. The 'Align' setting
allows you to indicate the position of the image on
the sheet. 'Top left' moves the image to the upper left
corner of the sheet.
'Centre' 'Centre' moves the image to the centre of the sheet.
'Top right' 'Top right' moves the image to the upper right corner
of the sheet.
'Margin Use this setting to increase or decrease the margin. By
shift' default, the values of the front side and the back side
are interlocked. This means that the values for the
front side and the back side remain identical.
If you want to define a different value for each side,
press . The icon changes to the unlocked status. Now
you can define the values for the front side and the
back side separately.
'Image shift' Use this setting to shift the image horizontally or ver-
tically. By default, the values of the front side and the
back side are interlocked. This means that the values
for the front side and the back side remain identical.
If you want to define a different value for each side,
press . The icon changes to the unlocked status. Now
you can define the values for the front side and the
back side separately.