Handle The Media Messages - Oce VarioPrint 4110 User Manual

Handle the media messages

Introduction
The media catalogue
contains a list of predefined media and their attributes
is an essential part of the system behaviour of the Océ VarioPrint® 4110/4120
helps you to print your jobs more easily while using the correct media
For transaction printing, the content of the paper trays (in terms of media from the media
catalogue) is translated into a format that the SRA controller understands. However, the
controller receives only a limited amount of information (name or size of the media).
This can lead to a miscommunication where the controller misses a required media. Then
the controller will ask for the required media via a message on the operator panel. This
'Media message' indicates the name or size of the missing media.
Your response to the'Media message' depends on the mode in which the printer works,
either:
The tray-to-tray mode, or
The tray-to-media mode.
This section describes how to respond to the 'Media message' for both modes.
Note:
A 'Media message' will only occur when the printer description language is PCL.
Handle the media messages
Chapter 4 - Work with the operator panel 213