Illustration
[47] Check the first set
Enable the checking of the first set
Note:
You cannot enable the checking of the first set for the active print job
list of 'Printed jobs'.
On the operator panel, press the 'Jobs' button.
1.
In the list of 'Waiting jobs' or 'Scheduled jobs', press the job you want to edit.
2.
Press 'Properties'.
3.
Note:
You can also press the job 2 times to access the 'Properties' window. This function is
comparable to double-clicking with a mouse.
Press 'Check first set' when the button states 'Off'.
4.
The text changes from 'Off' to 'On'. A check mark indicates that the checking of the first
set is enabled. The machine will automatically go on hold after the first set is printed.
Chapter 4 - Work with the operator panel
Check the first set
or a job in the
81