Assign the media to a paper tray
Assign the media to a paper tray
Introduction
The 'Trays' view has several functions (see
This section describes how to open the paper trays and assign the media in the 'Trays'
view.
Note:
The preferred way to load the required media is via the 'Schedule'. There you can select
a media and use the 'Load' button, or press the required media button 2 times.
Illustration
[95] Change and assign media
Load and assign the media to a paper tray
On the operator panel, select the 'Trays' view.
1.
Press the paper tray where you want to put the media, for example tray 2.
2.
Press 'Open'.
3.
168
Chapter 4 - Work with the operator panel
'Introduction to the 'Trays' view' on page
165).