Oce VarioPrint 4110 User Manual page 260

Add toner
Check the ridge first to put the bottle into the right position. Then push the toner bottle
3.
into the toner reservoir. Remember that you can not rotate the bottle when the bottle is
in the toner reservoir.
[143] Push the bottle into the reservoir
Remove the bottle when the bottle is empty. Be careful, do not spill toner.
4.
Put the cap back on the empty toner bottle.
5.
Close the cover of the toner reservoir.
6.
Close the left front door.
7.
Confirm that you added toner
Note:
The machine has no sensor that detects that you added toner. Therefore, you must
manually confirm that you added toner.
On the operator panel, press the button for the 'System' view.
1.
Select 'Printer'.
2.
In the 'Toner' section, press the button for 'Refill toner'.
3.
260 Chapter 7 - Keep the printer running