Table of Contents
Advertisement
Work with the workflow profiles
The use of the default workflow profiles
The following table makes recommendations about when to use which default workflow
profile.
When to use which workflow
Profile
'<html>Stan-
dard</html>'
'<html>Job by
job</html>'
'<html>Check and
print</html>'
'<html>Manual
planning</html>'
'<html>Unattend-
ed</html>'
The default settings for 'Receive'
The default 'Receive' settings
Workflow profile
'<html>Standard</html>'
'<html>Job by job</html>'
'<html>Check and
print</html>'
'<html>Manual plan-
ning</html>'
'<html>Unattend-
ed</html>'
180
Chapter 4 - Work with the operator panel
#
When to use
You need a productive workflow but you still want to have
sufficient control over the jobs.
You want to start the jobs one by one. Each time a job has been
printed, the machine goes on hold. You must always press the
Release key
to start the next job.
You want to check the quality and layout of each first set of a
job before the remaining sets will be printed.
The jobs are sent to the machine in a random order. You can
manually define the most productive order in which the machine
will print the jobs.
You want to continue printing while you are absent, for example
after working hours. Then the machine will print the scheduled
jobs, provided that all the required media, supplies and output
locations are available.
#
'Receive' settings
'Destination of print job'
'Scheduled jobs'
'<html>As in job</html>'
'Scheduled jobs'
'Waiting jobs'
'<html>As in job</html>'
'Destination of copy job'
'<html>Scheduled
jobs</html>'
'<html>Scheduled
jobs</html>'
'<html>Scheduled
jobs</html>'
'<html>Waiting
jobs</html>'
'<html>Scheduled
jobs</html>'
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
