Illustration
[85] Example of scan profiles in the 'Copy/Scan' view
Create a scan-to-file job
Put the originals face down in the automatic document feeder or put an original on the
1.
glass plate (see
On the operator panel, press the 'Copy/Scan' button.
2.
Select a scan-to-file profile.
3.
The job window opens.
If necessary, change the settings for the original and the file.
4.
Note:
You cannot edit all settings. The fixed settings are greyed out.
If necessary, enter the account ID.
5.
Press the Start button
6.
Now the scanner scans the originals. The system sends the resulting file to the scan server.
The file is stored with a predefined name in a designated directory. There is no message
on the operator panel to inform you that the file was stored successfully. You can access
the status information on the Controller.
'Original input on the glass plate or into the ADF' on page
to start the scan job.
Chapter 4 - Work with the operator panel
Create a scan job
100).
155