Description Of The Copy Job - Oce VarioPrint 4110 User Manual

Description of the copy job settings
Name of the
setting
'Staples'
'Margin
erase'
'Exposure'
'Subset start'
116 Chapter 4 - Work with the operator panel
Values Description
'None', 1 Here you can define the required number of staples.
and 2 The staple setting is only available when an output
location is available.
Margins of a document sometimes contain notes or
punch holes, for example. The machine allows you to
hide these elements on the copy. With the + and -
buttons of the 'Margin erase' setting you can define
how much margin of the original you want to erase.
You can enter a value up to 100 mm / 3.94 inches.
'Dark' You can adjust the settings for light areas and dark
areas on the print separately.
When an area on the output is dark grey but must be
black, then select a value of 1 to 3.
When the area must be lighter, then select a value of
-1 to -3.
'Light' When an area on the output is light grey but must be
white, then select a value of 1 to 3.
When the area must be darker, then select a value of
-1 to -3.
'On previous When you carry out a combined copy job the situation
sheet' can occur that the back side of the last sheet of a subset
is empty. When you select 'On previous sheet' the
system will skip the empty page. The next subset will
start on the empty back side.
'On new When you select 'On new sheet' the system will keep
sheet' the empty page. The next subset will start on a new
sheet.
Note:
If your machine has the optional puncher, the
name of the setting changes into 'Finishing'.
Then you can also enable or disable the punch
function.