Oce VarioPrint 4110 User Manual page 218

Create a transaction setup
When you assign A3/Ledger-like media or want to use short-edge feed for other media,
change the feed direction to 'Short-edge feed (SEF)'.
Repeat Step 4 for all the logical trays in your setup.
5.
Note:
When you have more than one printer, you can exchange transaction setups. Go to
'Transaction Printing' - 'Setups' and use the 'Import' and 'Export' functions.
How to modify a transaction setup
Go to 'Transaction Printing' - 'Setups'.
1.
Put a checkmark in front of the transaction setup to select the setup you want to modify.
2.
Click the 'Edit' button, if you want to change the name of the setup.
3.
Change the settings under the 'IPDS setup' tab (see
4.
on page 217).
You can change the settings:
by group (click the pencil at the right-hand side of the group settings). This is the
preferred method.
by item (click the pencil behind the individual settings).
Change the settings under the 'PCL setup' tab (see
5.
on page 217).
Change the values under the 'Settings' tab.
6.
Note:
The status of the setup is changed to modified. You have to load the setup to make these
modification available on the printer.
Before you can load a transaction setup, you have to switch the transaction printing mode
off-line.
Go to 'Transaction Printing' - 'Settings', and click 'Toggle the transaction printing mode'
7.
to switch the printer off-line.
Go to back'Transaction Printing' - 'Setups'.
8.
Click 'Load'.
9.
The setup is now available on your operator panel.
218 Chapter 4 - Work with the operator panel
'How to change the IPDS parameters'
'How to change the PCL parameters'