Illustration
[76] Make a basic copy
Make a basic copy
Put the originals face down and in readable form into the automatic document feeder or
1.
put one original on the glass plate.
On the operator panel, press the 'Copy/Scan' button.
2.
Press 'Copy job'.
3.
If required, define the settings for the original document and the output.
4.
Note:
You can also select a template (see
Enter the generic parameters in the 'Job' section.
5.
Select 'Scheduled jobs' in the 'Destination' field.
6.
Press the Start button .
7.
The job is added to the list of 'Scheduled jobs'.
'Use the templates' on page
Chapter 4 - Work with the operator panel
Make a basic copy
124).
119