Reset The Day Counters - Oce VarioPrint 4110 User Manual

Reset the day counters

Reset the day counters
Introduction
The 'Printer' section of the 'System' view displays 2 types of counters
Billing counters
Day counters.
These counters provide information about the number of sheets that have been printed.
This section first describes the 2 counters in the 'Printer' section and how to reset the
day counters.
General counter information
The following table describes the counters in the 'Printer' section of the 'System' view.
#
Type of counter
'Billing counters'
'Day counters'
The 'Billing counters' and the 'Day counters' provide information about the number of
1-sided and 2-sided prints that have been made on standard-size and large media. The
length of the media determines whether a media is standard size or large. Media with a
length of less than 390 mm (15.35") are referred to and counted as standard-size media.
Media with a length of 390 mm (15.35") or more are referred to and counted as large
media.
The operator panel displays the media icon ( or
media. For large media, the media icon is big. The media icon is used in various places
on the operator panel, for example in the 'Counters' section, in the 'Trays' view and in
the job information.
174 Chapter 4 - Work with the operator panel
Description
The 'Billing counters' section displays the total number of prints
that have been made since the machine was installed. You can-
not reset the billing counters.
The 'Day counters' section displays the number of prints that
have been made since the counter was last reset to 0. You can,
for example, reset the day counters at the beginning of a working
day or before you start a new job for a particular customer.
) as a small icon for standard-size