Shift The Margin Or Image - Oce VarioPrint 4110 User Manual

Shift the margin or image

Shift the margin or image
Introduction
Note:
This section applies to changing the settings of a print job or copy job that is already
available in the list of 'Waiting jobs' or 'Scheduled jobs'.
When you use for example pre-printed media with marked locations for specific text, a
misalignment of the text can occur. For example, an address is not exactly placed in the
centre of an address field, or an account number is not exactly placed in the appropriate
box. To correct these misalignments, you can shift the image. You can shift the images
on the front side and back side horizontally and vertically.
When you want to shift the margin or image of an existing job, you can use the following
methods.
Available methods to shift the image in the 'Properties' window
When
You use the margin
shift
You use the image shift
This section describes how to shift the margin or image of an existing job.
Note:
When you want to hide punch holes, use the setting 'Margin erase' (see
on page 112).
94 Chapter 4 - Work with the operator panel
Then
Your image will shift from the binding edge.
The image for left oriented documents will shift from
the left-hand margin. When the sheet is 2-sided, the
image at the back side will shift from the right-hand
margin.
The image for top oriented documents will shift from
the top margin. When the sheet is 2-sided, the image
at the back side will shift from the bottom margin
The image will shift from the bottom left corner.
#
'Output settings'