Oce VarioPrint 4110 User Manual page 36

The paper module
The parts of the control panel
Number
1
2
3
4
5
36 Chapter 3 - Overview of the system components
#
Description
The LEDs indicate the current amount of sheets in the correspond-
ing paper tray. Each lit-up LED indicates the presence of about 100
sheets (based on media of 80 g/m
Press the button to open the corresponding paper tray. You can
only open 1 paper tray at a time.
When the check mark is green, the media in the paper tray is defined.
The system knows which media is in the paper tray.
When the arrows are red, the media in the paper tray is not defined.
The system does not know which media is in the paper tray. The
'Trays' view on the operator panel indicates that no media is assigned
to the paper tray.
The 'Not assigned' button. This button applies to the paper tray
where you just put the media.
You can press the 'Not assigned' button when you load a new media
type into a paper tray without defining this media type on the oper-
ator panel first. Then the printer cannot accidentally use the media
in this paper tray before the media is correctly defined on the oper-
ator panel. You can define the media type in the 'Trays' view on the
operator panel later (see
168).
Note:
Make sure that the paper tray is open when you press the
'Not assigned' button.
2
or 20 lb bond).
'Assign the media to a paper tray' on page