Iblm (Integrated Booklet Maker); Create A Booklet With The Iblm - Oce VarioPrint 4110 User Manual

iBLM (integrated Booklet Maker)

Create a booklet with the iBLM

Introduction
If your machine has the optional integrated booklet maker (iBLM), you can use the 'Copy
job' function to create a sorted, folded and stapled booklet. You can also use the 'Com-
bined copy job' function (see
a booklet . There are 4 locations where you can create booklets.
The operator panel.
1.
The printer driver.
2.
PRISMAaccess or PRISMAprepare.
3.
Drivers that use Océ Job Ticket, PostScript or PCL.
4.
When you use A4 / Letter for the booklet maker, make sure that you load A4 or Letter
over the short edge feed (SEF). The booklet maker can only process paper that is fed over
the short edge ( ).
In the 'Output' section, you can access the 'Booklet' function in the 'Layout' settings. If
you put A4 paper into the automatic document feeder and one of the paper trays contains
A3 paper, the following settings in the 'Output' section are set automatically.
The'Media' setting in is set to A3.
The 'Output location' setting is set to Booklet maker.
Note:
You can select A4 for the 'Media' setting instead of A3. The 'Zoom' setting is then set
to 70.7% if you loaded A4 paper over the short edge feed (SEF) into one of the paper
trays.
Before you begin
Remove all staples from your originals.
Remove the paper clips.
Make sure that the originals in the automatic document feeder have the same size.
Make sure that the automatic document feeder does not contain more than 75 sheets
(80 g/m² or 20 lb bond).
Make sure that the originals are not curled.
'Combine subsets into one document ' on page
Create a booklet with the iBLM
Chapter 6 - Optional finishers
120) to create
245