The Configuration Of The Scan-To-Email - Oce VarioPrint 4110 User Manual

Mail server settings
Prefix selector string
Configure the recipient search - LDAP server
Next, you must configure the address source, the source that contains the list of user
codes and email addresses. This address source can be the LDAP server or an address list
file. When you use an LDAP server, you must check the check box 'Enabled' to enable
the 'LDAP server' and configure the settings described below.
Recipient search settings - LDAP server
Recipient search set-
tings - LDAP server
'Port'
'Host name/IP address'
'User name'
'Password'
'Search database'
'User identification'
The configuration of the scan-to-email function
Description
Identify the scan jobs that are sent to email. The prefix
separates the scan-to-email jobs from the scan-to-file jobs.
You can use up to 8 characters (a-z, A-Z , 0-9, _). The
prefix selector string must be identical to the application
selector string in the scan-to-email profiles.
Default: Email
#
Description
Default: 389
Enter the address of one LDAP server. This address can be
a host name of 32 characters or an IP address.
Default: Empty
The user name gives you access to the server. This user
name can be any name of up to 20 characters (a-z, A-Z ,
0-9, _).
Default: Empty
The password can be any word of up to 20 characters (a-z,
A-Z, 0-9, _). Each character that you enter is shown as an
*.
Default: Empty
Define the path to the search database. The search database
is the area in which an email address is searched. The search
database can be any data file that contains at least unique
identifiers for the users and email addresses. The search is
from top to bottom only. You must enter the top node of
the search database to enter the data in the file.
Default: Empty
This attribute is the field that is compared with the code
that is entered on the operator panel.
Default: Empty
Chapter 4 - Work with the operator panel 139