Introduction to the Copy/Scan view
The Copy/Scan view
Introduction to the Copy/Scan view
Introduction
The 'Copy/Scan' view is the starting point for all your copy jobs and scan jobs. The
'Copy/Scan' view contains buttons that give access to the creation of copy jobs and scan
jobs.
Select 'Copy job' to copy paper originals that do not consist of several parts (subsets)
which require different settings
Select 'Combined copy job' to copy paper originals that consist of several subsets which
require individual settings
Select a scan profile when the scan function is enabled. The scan function enables you
to create a digital document (a file) from paper originals. The system can send this
file to a scan server or to an email address, for example. The names of the scan profiles
that the 'Copy/Scan' view displays derive from the names that are set in the scan profiles
file (.csv file). The scan profiles file is located on the controller. You can retrieve the
file from the Settings Editor application on the controller. The scan profiles file allows
you to define a large number of scan related settings (see
141).
This section describes the items of the 'Copy/Scan' view.
96
Chapter 4 - Work with the operator panel
'The scan profiles file' on page