Change the media
Introduction
Note:
This section applies to changing the settings of a print job or copy job that is already
available in the list of 'Waiting jobs' or 'Scheduled jobs'.
When a job is sent to the machine, the desired media will usually be indicated in the job
ticket. However, you can replace the indicated media by another media from the media
catalogue with the same size.
This section describes how to change the media for a specific job. The following 3 illus-
trations give an impression of the screens you will see when you change a media in the
'Properties' window.
Illustration
[48] Select the media to replace
Chapter 4 - Work with the operator panel
Change the media
83