Oce VarioPrint 4110 User Manual page 17

Power mode Description
Starting up Stage 1: After you put the power
(divided into 2 switch
stages) before you press the On/Off
button .
Stage 2: After you press the
On/Off button .
Stand-by The machine is ready to print
mode jobs.
Run mode The machine is busy.
Low-power The machine automatically en-
mode ters the low-power mode when
the machine has been in the
stand-by mode for a defined
time and no button was pressed.
The machine wakes up when a
job arrives in the list of 'Sched-
uled jobs' or when you press a
button. The machine will start
to warm up.
Going into The machine is preparing to go
sleep mode into the sleep mode.
in the 'I' position, but
The power modes
Status of the Status of the
On/Off button
Hold button
and Release
button
Blinking am- Off
ber
Continuous On
green
Continuous On
green
Continuous On
green
Continuous On
green
Blinking am- On
ber
Chapter 2 - Power information 17