Create A Scan Job - Oce VarioPrint 4110 User Manual

Create a scan job

Create a scan job
Introduction
The scan function allows you to convert a paper original into a digital document. To start
a scan job, you must first select a scan profile in the 'Copy/Scan' view. The 'Copy/Scan'
view can contain various scan profiles. Basically you can carry out 2 types of scan jobs:
Scan-to-file jobs
Scan-to-email jobs.
For each type of scan job there can be several scan profiles. Depending on your job, you
must select the required scan profile.
This section describes how to create a scan-to-file job and a scan-to-email job.
Note:
The fastest way to scan a set of originals of the same, standard paper size is to place the
set in the automatic document feeder. You can put a maximum of 75 sheets (80 g/m²
or 20 lb bond) in the automatic document feeder. You must scan originals of a non-
standard size from the glass plate. The automatic document feeder of the machine con-
tains a 'Double-sheet detection' function. This function makes sure that the originals
in the automatic document feeder are separated well. If you want to copy or scan paste-
up originals, disabling the double-sheet detection can be convenient (see
double-sheet detection' on page
154 Chapter 4 - Work with the operator panel
197). By default, the double-sheet detection is enabled
'Disable the