Overview Of The System; Chapter 3; Introduction To The Main System Components And Finishing - Oce VarioPrint 4110 User Manual

Introduction to the main system components and finishing devices
8
9
10
26 Chapter 3 - Overview of the system components
Component
Puncher
Stacker
Puncher/folder
External finishers
Function
The puncher can make holes in the prints. The
number of holes depends on the die set that is in-
stalled (see 'The output locations' on page
The stacker adds output capacity to your system.
The stacker can not staple the jobs. (see
locations' on page 32).
The puncher/folder can make holes in the prints.
Furthermore, the puncher/folder can fold the
prints (see 'The output locations' on page
The machine supports several external finishers.
These finishers are not indicated in the illustra-
tions. See the user manuals of these devices for
more information.
32).
'The output
32).