If necessary, adjust the original guides of the automatic document feeder.
3.
Illustration
[77] Example of the preview pane
Combine subsets into one document
On the operator panel, press the 'Copy/Scan' button.
1.
Press 'Combined copy job'.
2.
The job window opens.
Define the settings for the first subset (original and output).
3.
Note:
Some settings that you define for the first subset apply to the whole job, the 'Layout'
settings, for example. These settings are fixed and are greyed out after scanning the first
subset.
Press the Start button .
4.
Put the next subset into the automatic document feeder or on the glass plate.
5.
Repeat the steps 3 - 5 for all other subsets.
6.
Combine subsets into one document
Chapter 4 - Work with the operator panel
121