Oce VarioPrint 4110 User Manual page 171

The items of the 'Printer' section
Description of the 'Printer' section
Num-
ber
1
2
3
4
5
6
7
8
Item
Toner level
Refill toner
Stapler level
Stapler level
Stapler level
Status of the external
finisher
'Billing counters'
'Day counters'
#
Function
Indicate the filling level of the left-hand toner unit
(see 'Check the status of the toner reservoir' on page
172).
Resets the toner status to status filled (see
toner' on page 258).
Indicate the number of staples that stapler 1 of the
finisher has used since the last refill (see
status of the staple cartridges' on page
Indicate the number of staples that stapler 2 of the
finisher has used since the last refill (see
status of the staple cartridges' on page
Indicate the number of staples that the stapler of
the stacker/stapler has used since the last replace-
ment.
Indicate whether the optional external finisher is
on-line or off-line.
Indicate the total number of prints that have been
made since the printer was installed (see
meter readings' on page
billing counters.
Indicate the number of prints that have been made
since the latest reset. You can always reset the day
counters (see 'Reset the day counters' on page
Chapter 4 - Work with the operator panel
Introduction to the 'Printer' section
173).
173).
176). You cannot reset the
'Add
'Check the
'Check the
'Find the
174).
171