Combine Subsets Into One Document; Make A Basic - Oce VarioPrint 4110 User Manual

Combine subsets into one document

Combine subsets into one document
Introduction
You can use the copy function of the machine to carry out all kinds of copy jobs. You
can carry out a basic copy job where all the settings you make apply to the whole document,
for example (see
like brochures or reports can be more laborious. The following situations can occur, for
example.
You want to copy a document that consists of several parts - called subsets - that differ
from each other and require individual settings
You want to combine different documents into one document
You want to include tab sheets and inserts in your document to separate chapters, for
example.
When you include tab sheets or inserts, you must define each tab sheet or insert as a
separate subset. Make sure that you have defined tab sheets and inserts in the Media
catalogue. You can find the Media catalogue in the Settings Editor application on the
controller.
Different subsets are subsets that have a mix of 1-sided and 2-sided pages, or require dif-
ferent media, for example. When you copy these types of documents, you must define
the settings for each subset individually. The 'Combined copy job' function allows you
to combine subsets into one document. The preview pane shows a full overview of the
subsets you defined.
This section describes the following.
Combine subsets into one document.
Furthermore, this sections describes the actions you can carry out from the View
subsets pane.
Add a subset.
Insert a subset.
Delete a subset.
Edit a subset.
Before you begin
Divide your document into subsets.
1.
Put the first subset into the automatic document feeder or on the glass plate.
2.
Note:
When you use the automatic document feeder, the size of the originals must be one of
the supported standard sizes.
120 Chapter 4 - Work with the operator panel
'Make a basic copy' on page 118). However, the creation of documents