[59] Landscape original, short edge feed
Portrait original, long edge feed
Hold the original in front of you in readable position.
Turn the original over the long edge.
Place the original into the automatic document feeder or on the glass plate.
Note:
You get the maximum productivity when you scan A4 originals in long edge feed direc-
tion.
Portrait original, short edge feed
Hold the original in front of you in readable position.
Rotate the original 90 degrees anti-clockwise.
Turn the original over the long edge.
Place it into the automatic document feeder or on the glass plate.
Landscape original, short edge feed
Hold the original in front of you in readable position.
Turn the original over the short edge.
Place it into the automatic document feeder or on the glass plate.
Note:
If you scan an original which long edge size is greater than the vertical glass plate size,
you must always use a short edge feed. Long edge feed does not fit into the automatic
document feeder.
Original input on the glass plate or into the ADF
Chapter 4 - Work with the operator panel
101